Re: Dell n5010 can be converted from graphic version to non graphic
Thank you
Dell n5010 can be converted from graphic version to non graphic
Collapse
X
-
Re: Dell n5010 can be converted from graphic version to non graphic
Please give me attached files
Thanks broLeave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
can i have a complete step by step and procedure how to convert graphics to uma of dell n5010?thanks
where is the pdf sir where i can downloard it?thanksLeave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
Hello ,
I have a similar problem. A blank screen appears, but the windowa starts normally. Where can the problem be? Can the video card not work but the windows 10 will start normally?
When I press D + power button the display turns on and I have a red, blue, green, white screen ... diagnosis mode
attach a photo
The problem is visible in this video clip.
https://youtu.be/z6Dx2qPdML8
When I touch IC Voltaging CPU Core declined by 100mV and the display/picture changes. Do you have an idea where to look the problem. Can it be burned CPU? Thanks!Best regards!Attached FilesLeave a comment:
-
-
Re: Dell n5010 can be converted from graphic version to non graphic
Originally posted by adeladelDear all
Kindly I ask all of you
1- if some one have N5010 motherboard circuit after modified to non graphic, please share it
2-I saw in net some one converted from graphic version to non graphic but without jumper
if some one try such method please advice
best regards
recently i converted an N5010 board using Dr. Bios way.
It works only for laptop's display, not HDMI's or VGA's outputs.
Now i am trying to resolve this too.
Check the attachment.Leave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
Dear all
Kindly I request photos for both side of dell n5010 motherboard which I can see all elements and all writing thanks for your kind supports
I have dell N5010 laptop, i have got problem in ATI graphic card and I want to use intel instead of ATI
What is the best way to perform such task
Best regards
Dear all
Kindly I ask all of you
1- if some one have N5010 motherboard circuit after modified to non graphic, please share it
2-I saw in net some one converted from graphic version to non graphic but without jumper
if some one try such method please advice
best regards
Dear vektro
Thanks for your kind reply, Kindly explain to me (such method only work for display and not for HDMI or VGA output)
regardsLeave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
tankyouLeave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
Hello! I did the convertion successfully and i have image but my problem is that i have a little distortion on the screen like small red and black dots like shadows! Do you know what it can be?Leave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
Hello i have only backlight.help me pleasssssLeave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
hello
there is a lot of method and not true
i have white screen problem
please help meLeave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
Hi, can you explain, why you markered "D point" on (9) picture, without any notes what to do there?Leave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
Graphics ram removal is optional though advised to remove to reduce power consumption but still as i said is not mandatory. So you need to look at vcc circuit/Bios corruption. Might me ME region issued with bios or even looking at dying PCH.Leave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
I have convert this its have display, but after 2 minutes its becomes off, processor over heat. I remove graphic chip, but cannot remove graphics ramLeave a comment:
-
-
Re: Dell n5010 can be converted from graphic version to non graphic
Hi. I follow all the steps from vickey_vip but when i press the power button the screen flashes like is go to open and then get's again black.
Note: I have removed the BGA chip and all the rams if there is any problem?
Regards.Leave a comment:
-
-
Re: Dell n5010 can be converted from graphic version to non graphic
I am tring this method but i think there is missed page. Could you help me please ..Leave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
Anyone who get white display or Blank screen check below two solution if you get white display only backlight then remove any cap under Intel VGA which is placed under 1 mega ohm resistor and if you get black display with backlight mean no data or character showing on screen then you must check R2603 (0 Ohms resistance) is there you put or not. If you forget to add this reg. Then you not get any data on screen I am attaching picture of that location. Today I successfully convert another motherboard of dell using my previous posting image methodLast edited by vickey_vip; 01-02-2018, 03:01 AM.Leave a comment:
-
Re: Dell n5010 can be converted from graphic version to non graphic
still problem are same ,,, white display pls replyLeave a comment:
Leave a comment: